Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Internal edge in GSD

Status
Not open for further replies.
sudhakarn

sudhakarn

Automotive
Apr 1, 2013
506
Hi All,

Could any one please explain me what is the meaning of " internal edge " in CATIA GSD boundary command?

or what are the points to be considered while extracting a "boundary" ?

Thanks in Advance !
 
Status
Not open for further replies.

Similar threads

TiagoFigueiredo
  • Locked
  • Question
Draft in GSD 1
Replies
6
Views
500
NP_1612
NP_1612
rookiezzz
  • Locked
  • Question
Return the nearnest surface and edge from body against point 1
Replies
2
Views
2K
rookiezzz
rookiezzz
TiagoFigueiredo
  • Locked
  • Question
GSD good practices 2
Replies
2
Views
180
Macm_020171
Macm_020171
W
  • Locked
  • Question
How to Define Circle Edges for Points in CATIA VBA?
Replies
3
Views
2K
TudorM
TudorM
NirVidP
  • Locked
  • Question
Parent of edge / face
Replies
1
Views
321
Little Cthulhu
Little Cthulhu

Part and Inventory Search

Sponsor

Back
Top Bottom