Mar 22, 2015 #1 akhtar07 Mechanical Mar 8, 2015 59 AE Hello guys, I am facing a little problem. How to create interruptions on the dimension line, not on the extension. The clipping is not method i am looking for. Please find attached file and let me know. Warm regards, Akhtar Aziz http://files.engineering.com/getfile.aspx?folder=4f836249-a0c1-4991-91ca-84b3f868283c&file=Untitled.jpg
Hello guys, I am facing a little problem. How to create interruptions on the dimension line, not on the extension. The clipping is not method i am looking for. Please find attached file and let me know. Warm regards, Akhtar Aziz
Mar 23, 2015 #2 weavedreamer Automotive Aug 1, 2007 279 US You might want to try "slanting" the two dimensions away from one another. Check under the dimension's Propoerties>Extension Line tab. Upvote 0 Downvote
You might want to try "slanting" the two dimensions away from one another. Check under the dimension's Propoerties>Extension Line tab.
Mar 23, 2015 #3 jackk Mechanical Nov 22, 2002 1,306 US You cannot add interruptions to dimension lines. Depending on what you are dimensioning, you can slant the dimensions as Weavedreamer said and/or position the dimensions below the geometry. Upvote 0 Downvote
You cannot add interruptions to dimension lines. Depending on what you are dimensioning, you can slant the dimensions as Weavedreamer said and/or position the dimensions below the geometry.
Mar 23, 2015 Thread starter #4 akhtar07 Mechanical Mar 8, 2015 59 AE Thanks guys. I will look at it and let you know. Warm regards, Akhtar Aziz Upvote 0 Downvote
