Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Intersection LOS

Status
Not open for further replies.

transgirl

Civil/Environmental
Jul 21, 2010
1
0
0
US
Is it possible, using HCM method or ICU method, to do a proper intersection LOS analysis using ONLY turning counts, and not using any overall through traffic counts?
 
Replies continue below

Recommended for you

If you have machine counters on all approaches, you could subtract the turning volumes from the total approach volumes to get the through volumes.

Otherwise, I doubt it, unless some math whiz can reduce it to a system of four equations in four unknowns.

"...students of traffic are beginning to realize the false economy of mechanically controlled traffic, and hand work by trained officers will again prevail." - Wm. Phelps Eno, ca. 1928
 
I don't think it's possible to calculate the LOS without the through volumes. The individual LOS for each intersection movement is impacted by the through traffic and other turn-lane volumes.
 
Status
Not open for further replies.
Back
Top