Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

intralink

Status
Not open for further replies.

mechbull

Computer
Nov 28, 2005
36
i have obtained a copy of intralink for testing
the problem is when i run set up i get the opening screen
with the ptc logo at top and the exit button at bottom everything else is grayed out.

Bad copy? or because i want to try before i buy im having this problem?
 
Replies continue below

Recommended for you

What version of Intralink, 3.4 or 8?

Intralink 8 is a lot harder to setup and requires Oracle and maybe some other third-party apps be installed first.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
Sr IS Technologist
L-3 Communications
 
sorry i left that out its 3.4
this is whay i get

--------------------------------------------------
l select product to be installed l
l l
l (grayed out area) l
l l
help exit

sorry for the bad pictorial
 
What was the source of the copy of Intralink? Was it a PTC CD?

A while back I was fielding a support call for a client who had a similar install problem, though not exactly the same. After a while I figured out that he was trying to install a pirated copy of Pro/E which was corrupted.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor