Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

IRIS Control Valve help

Status
Not open for further replies.
kickerz24

kickerz24

Mechanical
Dec 8, 2004
1
I am doing a project where I am to use an IRIS flow control valve to vary a volumetric flow from 100 scfm to 2000 scfm and it needs to handel dilute diesel exhaust from 40 to 400 degrees F. I need to design this, does anyone have any info or advice for this, sorry but i am on a very tight deadline. Thank you.
 
Status
Not open for further replies.

Similar threads

I
  • Question
Control valve sizing: Xt value
Replies
5
Views
1K
im_danl
I
sentrifice
  • Locked
  • Question
Control Valve Project Documents
Replies
6
Views
1K
sentrifice
sentrifice
T
  • Question
Non return valve
Replies
7
Views
2K
Snickster
Snickster
Ram55
  • Question
Pressure reducing valve testing
Replies
2
Views
2K
Ram55
Ram55
T
  • Question
Flowrate in a valve
Replies
4
Views
3K
Snickster
Snickster

Part and Inventory Search

Sponsor

Back
Top Bottom