Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is HIC test applicable for low alloy CrMo plates? 1

Status
Not open for further replies.
teokal

teokal

Mechanical
Joined
May 4, 2007
Messages
78
Location
GR
Dear all,

my question today is if HIC test (as described in NACE 284) is applicable for low alloy CrMo steel plates and for Pressure vessels in wet H2S service. Or is it only applicable for Carbon steel (C-Mn) plates? What about fittings?

Thanks!
 
Sort by date Sort by votes
Yes, it applicable to Cr-Mo steels. It is applicable to any kind of part.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mrmalcolm
  • Question Question
Is intergranular corrosion test required for duplex steel
Replies
9
Views
13K
EdStainless
EdStainless
rscosta1976
  • Locked
  • Question Question
Alloy 825 behavior under gas production environments
Replies
11
Views
2K
ShabsRBI
ShabsRBI
V
  • Question Question
Chloride criteria in MR0175/ISO 15156-3 for austenitic stainless steels
Replies
12
Views
16K
SJones
SJones
JoeBobJenkins
  • Question Question
Is there an equivalent to ASTM D-930 and ASTM D1280?
Replies
6
Views
21K
JoeBobJenkins
JoeBobJenkins
SETXINSP
  • Locked
  • Question Question
Conc Sulf Acid Damage to Alloy 20??
Replies
16
Views
1K
SETXINSP
SETXINSP

Part and Inventory Search

Sponsor

Back
Top