MarkusLAndersson
Mechanical
Is it possible to read text in to mathlab from excel?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Is it possible to read text in to mathlab from excel?
- Thread starter MarkusLAndersson
- Start date
- Status
- Thread starter
- #3
MarkusLAndersson
Mechanical
Yes I was! Sorry! I cant find out how to do this do you have an example? I would like to read in the text string "200x200x12" for display in mathcad.
Check the enclose example for one number.
[sub]NOTE: If you have a series of string values in excel, you may import this as a vector and apply similar logic converting string to numbers.[/sub]
Good luck.
[sub]NOTE: If you have a series of string values in excel, you may import this as a vector and apply similar logic converting string to numbers.[/sub]
Good luck.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
