Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

is pure oxygen cost effective in industrial fermentation?

Status
Not open for further replies.
Replies continue below

Recommended for you

It depends on purity.
There are membrane and pressure swing absorption units that can give you >98% oxygen.
If that is good enough then it is likely worth it.
If you have to use high purity LOx then I doubt that the numbers would work out.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, consulting work welcomed
 
Status
Not open for further replies.
Back
Top