Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Is there a way to define sticking/separation based on certain parameters?

Status
Not open for further replies.
Luke720

Luke720

Materials
Mar 26, 2013
14
US
I would like to specify adhesion between two surfaces based on the stress or strain at the contact surface, is this supported by abaqus? If so, would somebody mind pointing me to where I can read about it in the documentation.

 
Status
Not open for further replies.

Similar threads

BharathSwami
  • Locked
  • Question
Fractional Derivative based viscoelastic model
Replies
0
Views
10
BharathSwami
BharathSwami
Tsaqif
  • Locked
  • Question
Sticking Contact Problem Abaqus
Replies
2
Views
27
oldNail
oldNail
liq001
  • Locked
  • Question
How to apply a B.Cs that move the object in 45 degree? or certain angle?
Replies
7
Views
19
liq001
liq001
alegio20
  • Locked
  • Question
How to define an elastic boundary condition? Rotational in my case 1
Replies
4
Views
30
alegio20
alegio20
Gardenfence
  • Locked
  • Question
How to excite a beam through a spring?
Replies
3
Views
29
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top