is there any utility which can convert NX6 part to NX4 part

[NXsupport]

Hi,

Is there any utility to convert already existing NX6 part to NX4 part.. I can do the parasolid out and parasolid in to NX4 file, but I will loose the drawing.. I was to keep the drawing also..

NX6.0.5.3

 

[JohnRBaker]

You could try using IGES or STEP. However, there is NO NX utility which will 'convert' a newer NX Part file into something which can be opened in an older version of NX and still retain such things as features, assemblies, drawings, etc. Other than using a standards-based translator, as I suggested above, the officially supported built-in workflow only allows the unparameterized Solid/Sheet bodies to be 'down-versioned' via the Export -> Parasolid function.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[looslib]

There is NO conversion utility that will keep a drawing associated to the model.
Use STEP or IGES for the model and DXF or IGES for the drawing.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli