Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 10423 Can anyone tell me if

Status
Not open for further replies.
Hush

Hush

Mechanical
Dec 21, 2001
317
0
0
US
ISO 10423

Can anyone tell me if ISO 10423 still contains the dimensions for OTIS style lubricator adaptors in the appendices. I'd like to know before I blow the $250 US for a copy.
 
Status
Not open for further replies.

Similar threads

1503-44
  • Locked
  • News
BLM EPA FINAL RULE Methane Emissions
Replies
2
Views
25
1503-44
1503-44
PressEquip
  • Locked
  • Question
What are the best/better test methods for determining oil cut? These wells have high water cut
Replies
7
Views
32
waross
waross
High_Volt
  • Locked
  • Question
Echo meter utilization for tubing
Replies
2
Views
7
sraesttam
sraesttam
tobyman
  • Locked
  • Question
Please anyone advise on a Emulsion treater,
Replies
1
Views
2
TD2K
TD2K
rumirav
  • Locked
  • Question
Problems in LPG Merox extraction unit
Replies
0
Views
2
rumirav
rumirav
Back
Top