Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 2768 "Broke Edge" Metal Stamping

Status
Not open for further replies.
joecool1964

joecool1964

Automotive
Joined
May 15, 2013
Messages
7
Location
US
This specification has a description that reads "broken edges"
Is this term applicable to a metal stamping part, if so what would this apply to on a stamping part ?
Or is this a machining term only ?
 
Sort by date Sort by votes
The following are excerpts from ISO 2768-1:

It applies to the dimensions of parts that are produced by metal removal or parts that are formed from sheet metal.

a) linear dimensions (e.g. external sizes, internal sizes, step sizes, diameters, radii, distances, external radii and chamfer heights for broken edges)

 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

I
  • Locked
  • Question Question
interpretation of unilateral tolerance defined with ISO standard
Replies
0
Views
2K
imanoj23
I
spray_arc
  • Locked
  • Question Question
ISO 15614 Level 2 and ISO 9606
Replies
1
Views
1K
kingnero
kingnero
spray_arc
  • Locked
  • Question Question
ISO 3834 and EN 1090 Certifications for EURCODE 3
Replies
3
Views
1K
kingnero
kingnero
O.Rezzik
  • Locked
  • Question Question
Clarification for ISO 6892 Annex E - E.2.2 Longitudinal or transverse strip
Replies
0
Views
791
O.Rezzik
O.Rezzik
Ganeshrnair9
  • Locked
  • Question Question
ISO standard for welding procedure and welder qualification on Alu Zinc coated steel sheet
Replies
1
Views
1K
kingnero
kingnero

Part and Inventory Search

Sponsor

Back
Top