Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

ISO 9001 2000 Standard 1

Status
Not open for further replies.

surrf

Mechanical
Jun 22, 2005
5
Where can I purchase the standard ISO 9001 - 2000?
 
Replies continue below

Recommended for you

You can check out this forum's faq182-802

Also, you should be trying to get certification through a Registrar. The Registrar should include the manual as part of the certification process. A directory of Registrars can be found at
[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
 
ISO standard 9001:2000 Quality management requirement for
7.5.2 Validation of processes for the production and service provision does not apply to our organization. I was wondering 7.5.1 control of production and service provision is applicable to us.(because Post delivery activities is not applicabe to us.)
 
If a particular section of the standard does not apply, then document it in your procedures:

Section 7.5.2. No action required. This section does not apply in this organisation

Good Luck
johnwm
________________________________________________________
To get the best from these forums read faq731-376 before posting

Steam Engine enthusiasts:
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor