Tuckabag
Petroleum
- May 10, 2010
- 125
A client has requested that we put forward a proposal for design/manufacture of isokinetic sample probes for use on a high pressure, natural gas pipeline in 2 phase regime.
We have a lot of experience in non-isokinetic probe design, however I am struggling to find a standard that provides design criteria for high pressure, isokinetic sampling.
ASTM D1066 is steam based and apparently has design detail for probe nozzle designs, however I am hesitant to buy a copy if there is no relevant information in there with regards to hydrocarbon sampling.
Is anyone familiar with this standard? And if so, does it include reference for hydrocarbon sampling?
Are there any other standards I should be taking a look at that could be of assistance?
Thanks.
We have a lot of experience in non-isokinetic probe design, however I am struggling to find a standard that provides design criteria for high pressure, isokinetic sampling.
ASTM D1066 is steam based and apparently has design detail for probe nozzle designs, however I am hesitant to buy a copy if there is no relevant information in there with regards to hydrocarbon sampling.
Is anyone familiar with this standard? And if so, does it include reference for hydrocarbon sampling?
Are there any other standards I should be taking a look at that could be of assistance?
Thanks.