Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Isotropic Finishing

Status
Not open for further replies.
dryfinish

dryfinish

Industrial
Feb 24, 2005
2
0
0
US
thread78-162316 There a variety of methods that can be used to develop isotropic superfinishes besides chemically accelerated vibratory finishing... Some of these are described in the article link below... these methods are high pressure and high intensity methods that develop considerably more compressive stress while additionally plateauing and isotropicizing surfaces...

David A. Davidson
[DESC] Deburring Technical Group
SOCIETY OF MANUFACTURING ENGINEERS
 
whats a good method for masking areas with critical very very close dimensions, that are not to be superfinished. for example .0002 tolerance journals
 
Status
Not open for further replies.
Back
Top