Issue with NX 10.0 Graphics Performance

[themize]

Hello NX users,
I am currently having issues with graphics in modeling files. They appear to leave a bunch of lines etc.. the only way I have been able to get rid of these said lines is to click the 'update display' button. After loading another model in the same assembly though I run into having to hit update again and again as I change between the work part in the main assembly. I have attached an example picture of the described problem(unfortunately I cannot upload any of my .prt files, please don't ask). Below are the specifics of my workstation and version of NX:


Processor - Intel Zeon CPU E3-1241 v3 @ 3.50 GHz 3.50 GHz
RAM - 32 GB
System Type - 64-bit
Graphics Card - Nvidia Quadro K2000 - Driver - 354.35
NX Version - NX 10.0 (no . releases)


Thank you for your assistance in this matter.

-A Mize

 

[Rob_N]

Unfortunately this is "as designed"
Siemens has a document headered "Improving Edge Display Quality “The Jaggies” In The NX Graphics Display"
nx-understanding-tessellations-in-the-graphics-display.docx on the Siemens site

more info here.

http://www.eng-tips.com/viewthread.cfm?qid=379803