Hi,
When we open the CAD model from the PDM system,the geometry of some of the parts is not displayed in the geometry area although the part nos are available in the specification tree.This happens when we load the model with the option "load" which we use normally for loading the parts to CATIA.
Strangely it is fine when we load this with the option "Load for consulting" which is used only for checking and not for editing and saving back.
Please let me know if you have any ideas.This happens only in some models.
P.S: the model gets highlighted in orange when we move the cursor over the part in the model tree.
When we open the CAD model from the PDM system,the geometry of some of the parts is not displayed in the geometry area although the part nos are available in the specification tree.This happens when we load the model with the option "load" which we use normally for loading the parts to CATIA.
Strangely it is fine when we load this with the option "Load for consulting" which is used only for checking and not for editing and saving back.
Please let me know if you have any ideas.This happens only in some models.
P.S: the model gets highlighted in orange when we move the cursor over the part in the model tree.