zaxo
Mechanical
- Jun 13, 2008
- 3
I am trying to retrieve the J integral results for a simple edge cracked plate. Does anybody know now to do it?
Here is my input:
NSEL,,NODE,,30,30,,
CM, crack_tip_node, NODE
CINT,NEW,1
CINT,CTNC,crack_tip_node,
CINT, SYMM, ON
CINT,NORM,0,2
CINT,NCONT,5
OUTRES,CINT,Last
OUTPR,CINT,Last
NSEL,All,,,,,,
Here is all I am getting:
CINT CALCULATION FOR CRACK # 1
NUMBER OF CONTOURS 5
SYMMETRICAL CRACK YES
CRACK PLANE NORMAL CSYS= 0 AXIS= 2
*** LOAD STEP 1 SUBSTEP 1 COMPLETED. CUM ITER = 1
*** TIME = 1.00000 TIME INC = 1.00000
Here is my input:
NSEL,,NODE,,30,30,,
CM, crack_tip_node, NODE
CINT,NEW,1
CINT,CTNC,crack_tip_node,
CINT, SYMM, ON
CINT,NORM,0,2
CINT,NCONT,5
OUTRES,CINT,Last
OUTPR,CINT,Last
NSEL,All,,,,,,
Here is all I am getting:
CINT CALCULATION FOR CRACK # 1
NUMBER OF CONTOURS 5
SYMMETRICAL CRACK YES
CRACK PLANE NORMAL CSYS= 0 AXIS= 2
*** LOAD STEP 1 SUBSTEP 1 COMPLETED. CUM ITER = 1
*** TIME = 1.00000 TIME INC = 1.00000