Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations The Obturator on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Keeping HV away from buildings?

Status
Not open for further replies.

cvirgil

Electrical
Sep 21, 2003
42
Does anyone know what the recommended clearances from tranmission lines are to buildings to avoid EMI. We have 115kV transmission lines at a site where we plan on building office facilities. There is concern as to interference from the 115kV transmissiin which will be less than 100'-0" away.

Thanks.
 
Replies continue below

Recommended for you

There isn't much interference from a 110 kV line. It is only when you have partial discharge that you get any HF emission and that is mostly from bad insulator chains in moist weather.

If that is what you are considering, then the distance has to be a lot more than what you say. On the other hand, P.D. isn't normally a problem with these low voltages and it only affects AM radio reception.

Computers, communication and automation devices are not affected at all.

BTW, I have a 110 kV line just outside my house. It has been there more than fifty years (longer than I had the house) and we get along quite well. Never noticed any problems at all. But the electric fence (for cattle) that runs close to the power line does interfere with my fax machine. It emits a chirp every 1100 milliseconds and that is real bad news for the fax.

Gunnar Englund
 
Surely you have forgotten to mention that extra arm projecting from the center of your chest![3eyes]

I thought you could have a problem with an insulated fence running along a transmission line.[surprise]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor