SMO
Mechanical
- Nov 11, 2016
- 73
I've used a Knowledge Fusion script before with Suppression by Expression and made the expression a conditional statement to where an Informational window would pop up letting the user know why the component feature went into a Suppressed state.
For example:
A Bellow (standard part) has a min and max operational length per the manufacturers specifications and we captured that in the Suppression by Expression statement. Bellow components were added into the assembly and swept along a guide string created by the user. If the guide string was too short or too long, the component would disappear (Suppress) and a window would pop letting the user know why. We would also use this information window to show the manufacturers specifications.
Anyone know what that scripts might be?
Regards,
SMO (NX11)
For example:
A Bellow (standard part) has a min and max operational length per the manufacturers specifications and we captured that in the Suppression by Expression statement. Bellow components were added into the assembly and swept along a guide string created by the user. If the guide string was too short or too long, the component would disappear (Suppress) and a window would pop letting the user know why. We would also use this information window to show the manufacturers specifications.
Anyone know what that scripts might be?
Regards,
SMO (NX11)