Krauss Maffei probs.

[Tom001]

Does anyone know what the alarm "Swivelled running board" might be, the machine in question is a Krauss Maffei 27000 kN MC3, the only thing i can think of is barrel swing, but the option is not fitted to the press, the alarms description page is blank and this fault is driving me mad, PLEASE HELP!

 

[chaving]

Do you have a walk area within the clamp unit ?
If so is the safety on this activating ?

Best of luck

 

[Tom001]

Found it in the end! Apparently the press is old and had some form of drawbridge that drops when the gate opens, this had been removed and i found a short on the limitswitches which had been stuffed under the press