Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Lab-scale in-line dynamic mixers

Status
Not open for further replies.

handee

Chemical
Mar 7, 2005
50
0
0
US
Looking for a lab-scale version of a high shear in-line disperser or mixer, flowrate less than 1 gpm. Most models are much bigger than this. Anyone have any suggestions? TIA
 
Replies continue below

Recommended for you

Contact your local machine shop about building one. There are many extrusion equipment builders out there that could handle this type of work as well.
 
Status
Not open for further replies.
Back
Top