Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lacks surfaces in Geomagic Design

Status
Not open for further replies.

Jadomini

Mechanical
Jul 26, 2016
1
Hello,

Does anyone have problems with export and import in Geomagic Design 2015? In a simple import export operation, the generated model lacks surfaces for all of extensions available for 3D model (stp, x_t, sldprt, etc.)!!! There is a possibility to remedy this inconvenience?
 
Replies continue below

Recommended for you

For the most part both imports and exports are dumb solids with no design history .
For more detailed help go to Alibre/ Geomagics own forum in the link below.
B.E.

You are judged not by what you know, but by what you can do.
 
 http://forum.alibre.com/
Status
Not open for further replies.

Part and Inventory Search

Sponsor