davidngemma
Industrial
- Oct 29, 2013
- 1
Hi fellow problem magnets,
I wrote a plc ladder logic program years ago and it used a programming technique which did not allow the next set of ladder instructions to be executed until the previous set had been completed. has anyone used this method? I think it was cascade or sequential programming. It was to program a SLC500 which controlled an assembly machine.
thanks in advance
dave
I wrote a plc ladder logic program years ago and it used a programming technique which did not allow the next set of ladder instructions to be executed until the previous set had been completed. has anyone used this method? I think it was cascade or sequential programming. It was to program a SLC500 which controlled an assembly machine.
thanks in advance
dave