Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

laptop for I-DEAS NX

Status
Not open for further replies.

royzhao

Mechanical
Jun 22, 2004
1
I am trying to buy a laptop that will work for I-DEAS NX. Anyone can give any recommandation? especially the vedio card requirements?
I tried to search sdrc certified notebook, but turns out none.

Thanks!

roy chao
 
Replies continue below

Recommended for you

We use Dell Latitude D600's with 1.6 GHZ processors, 30 GB hard drives, 512 MB RAM, and ATI Rage Mobility Radeon 7500 AGP adapter with 32 MB RAM. These are about a year old and are used for demonstrations and light modeling. I'd look at some of the newer Dell's with the Mobility Radeon 9700's with 64 MB RAM. These should work.
 
Hi,

We have two laptops for this. A Dell M50 and a Latitude 800?, also from Dell. The M50 is a workstation class laptop, nice enough for even large assemblies. I think Dell has a M60 in the market...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor