Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Large Diameter Anchor Rods with Corrosion Resistance

Status
Not open for further replies.

ThorenO

Structural
Jan 8, 2013
22
Hello,

I'm working on a sign structure near the ocean and wanted to see what type and specification of anchor rods would be recommended in the 2" diameter range.

Will the #18J A615-75 galvanized work in this environment or is there a stainless steel option at that diameter that would be better?

Thank you in advance for your input.
 
Replies continue below

Recommended for you

Are you using concrete reinforcing bar as an anchor bolt or some other function where it will be exposed to marine air? If only as rebar, one key to long life is the concrete cover over the rebar. You might need 3" of cover, especially if the foundation is into the water table and you could use bare rebar. Galvanized anchor bolts are routinely used in coastal locations. Fusion bonded epoxy coated rebar has also been used in coastal applications.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor