mtnaire67
Mechanical
- Apr 4, 2011
- 5
I hope this category is close to what I need for help. We manufacture fiberglass round rods in various lengths and diameters. My QC department has asked me to design 22 different go/no-go setups to check the lengths of our rods. This is just for starters. They range from 9" to 145" in length and need to be held to +/-.015". The diameter range is from 1/2" dia to 2-1/2" dia. I believe there is a laser inspection system out there that will work in this application, but I have searched Google and such and have not found what I need. We need to achieve 100% inspection and the inspection process is done off line and is not automated, yet. If someone could help recommend a laser inspection system that would work for this, that would be great. Thanks in advance.