cuttingedgelaser
Industrial
What is a average salary for a laser tech inhouse for cutting applications and repair ?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Laser tech pay
- Thread starter cuttingedgelaser
- Start date
- Status
LASERNINJA
Mechanical
Interesting question.
I have worked for a laser manufacture as a field service rep. I did that for about 7 years. I repaired everything on the laser, bumper to bumper. My best year I made about 60k. I went to work in a shop after that. I didn't want to travel anymore. I programed, serviced the lasers, applications, and filled in for operators on vacation. I think I was at about 45k. Didn't last.
My opinion, the best ones can't be domesticated so don't even try. Find someone who is pretty good, pay him what you pay your programmers, then pay a little bit extra a few times a year for "master" to come in and visit.
I have worked for a laser manufacture as a field service rep. I did that for about 7 years. I repaired everything on the laser, bumper to bumper. My best year I made about 60k. I went to work in a shop after that. I didn't want to travel anymore. I programed, serviced the lasers, applications, and filled in for operators on vacation. I think I was at about 45k. Didn't last.
My opinion, the best ones can't be domesticated so don't even try. Find someone who is pretty good, pay him what you pay your programmers, then pay a little bit extra a few times a year for "master" to come in and visit.
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question