lead_trail_zeros in drawing format

[bblankst]

I'm trying to create a new drawing format in Wildfire 3.0 such that new drawings created using this format will have lead_trail_zeros set to both. I know how to set this in an individual drawing (File-->Properties-->Drawing Options), but the drawing options in a format file are limited and do not include lead_trail_zeros.

Is there a different place to set this?

Thanks,
- Brian

 

[dgallup]

There is the config.pro option drawing_setup_file which you can point to a *.dtl file on your system of your creation with all the options in it.

If you use drawing template files a new drawing will inherit the setting in the template.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.

 

[bblankst]

Works perfectly. Thanks!