Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Lighting for a Orthodontic Area

Status
Not open for further replies.

ayakimov

Electrical
Apr 27, 2005
2
At our College we have a Dental School. We are renovating the Orthodontic area, only eight patient chairs, about a 35'x35' room. Patient heads will be pointing to the center of the room, with low walls for privacy. Kinda like a wagon wheel, with a walk around counter at the center.
Any experience for lighting? Original 20 plus year old design had 63, 2-lamp, 2x4 fixtures, acrylic prismatic lenses.
Would uplights be better, or stick with the prismatics? I didn't think parabolics would be good because patient would be looking directly at lamps. Any help would be great. Thanks. Andrew
 
Replies continue below

Recommended for you

If you have a white tile type ceiling. I'd say reccomend using indirect up-lighting for two reasons: 1) patients will not have to stare directly into light 2) indirect lighting provides for better light distribution (less shadows or dark spots) when dealing with cubical type setup.

Regards,

Sense
 
The ambient lighting is more for comfort than anything else. The lighting into the mouth is still mandatory and cannot be gotten from ceiling lights

TTFN



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor