Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

LIMITING MAWP?

Status
Not open for further replies.
Replies continue below

Recommended for you

Sort by date Sort by votes
NOZZLES DO NOT LIMIT MAWP (UNLESS PRESSURE TEMPERATURE RATINGS LIMIT) NEVER REINFORCEMENT

NOZZLES ARE DESIGNED TO MEET EITHER MAWP OR MAP IF YOU HAVE THE CORRECT METHOD CHECKED
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mechengineer
  • Locked
  • Question
use MAWP to check nozzle load & wind/earthquake loads
Replies
0
Views
12
mechengineer
mechengineer
mechengineer
  • Locked
  • Question
The governing MAWP to be used in support system and nozzle loads design as well
Replies
0
Views
4
mechengineer
mechengineer
CRL11
  • Locked
  • Question
Strange Nozzle MAWP Numbers
Replies
3
Views
19
Eddy1988
Eddy1988
ting123
  • Locked
  • Question
How compress calculates the MAWP of tubesheet
Replies
0
Views
7
ting123
ting123
Encho
  • Locked
  • Question
MAWP for nozzles
Replies
2
Views
3
fegenbush
fegenbush
Back
Top