Line Voltage Conditioner

[bobziva]

I have to provide a Line Voltage Conditioners to be installed in HAZARDOUS ZONES expecting Division2 products.
(1) I need information about any manufacturer making these products.
In many cases epoxy encased transformers, can be good for the Div.2 hazardous zones, but here the situation is much more complicated - I need line voltage conditioners, and this equipment have capacitors as potential spark source. Also, these capacitors are probably not epoxy protected.
Any information is welcome.
Thanks.

 

[bobziva]

Additional info must be presented.
Line Voltage Conditioners ( 12--208-240V, 1000 KVA in my case )should be installed to provide clean power to more outlets.

 

[bobziva]

Power Conditioner is 1500 VA, not 1500 kVA what I previously specified.
Sincerely,
Bob Z.

 

[jwerthman]

Try Controlled Power Company. They make a variety of good power conditioners. I don't know if they can meet your Div 2 requirements. Check their web site at:

http://www.controlledpwr.com