Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Linear Generator

Status
Not open for further replies.

WADMW

Mechanical
Mar 26, 2016
36
I am interested in designing a linear generator (miniature generator)of about 200 W, I would be really thankful if anyone could guide me with selecting the necessary permanent magnets and the coil, in order to achieve this. I have thought of a Halbach array magnet arrangement but I do have issues with selecting the type and gauge of the coil, whether it should be a square or a round cross section?
 
Replies continue below

Recommended for you

How many do you have to make?

Life and health important, or is this for a toy purpose where it doesn't matter of it breaks?
How many in a production run?
So, do you need to generate 200 watts continuously, or just to store and charge up a battery like a hand-held generator flashlight?
Manually made, or machine-built?
If not a hand-held unit (reallllly hard to get that much power out), what is the driver and how long is the intended oscillation length of the magnet through the bar?
 
There are a bunch of designs out there, that were intended to be driven by sterling engines.

= = = = = = = = = = = = = = = = = = = =
P.E. Metallurgy, Plymouth Tube
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor