Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

linear rails

Status
Not open for further replies.

frank-c

Industrial
May 10, 2018
3
Hi,

I have a NSK, NAH series carraige, 69.8mm x 44mm on a 20.0mm rail.
I have a drawing attached showing the desired position of the rails.

Enquiring if someone can give an indication of max load placed on the bearings in the drawing.?
Just the 90 degree downward load.
Not an area that i'm familiar with.




Thanks
 
 https://files.engineering.com/getfile.aspx?folder=1b74b63a-a442-4fc3-989a-3a766e27f0d2&file=CALC.pdf
Replies continue below

Recommended for you

Status
Not open for further replies.

Part and Inventory Search

Sponsor