linetype edge broken out section view

[ejbit]

In a draft file the contour lines of a broken out section (view) are always as thick as the contour lines of the model. In essence very logical.
However, is there a way to change this? Let's just say I want the lines to be phantom lines


Evert
SoldEdge V20
Windows XP Pro

 

[donyoung]

Evert,

when doing the sketch for the broken out section profile
within the ribbon bar you find a pulldwon to change
the line type (next to Finish)

dy

 

[ejbit]

Hi dy,

That I know. I might have been not clear.

What I actually want is to change the line type of the contour lines of the finished broken out section view.


Evert
SoldEdge ST
Windows XP Pro

 

[donyoung]

Evert,

got it now. AFAIK it's the same line style that is used
for the drawing. So changing this will change all the
lines (view --> Properties --> Display --> Visible edge style
But you may check this
- selecet the view that contains the BOSV
- RMB --> Draw in View
--> select the function 'Edge Painter'
-> in the RibbonBar select 'User defined Edges'
set the activated Pulldown to the style you want
and then select the lines to change
when finished --> Return

dy

 

[ejbit]

dy,

Thanks a lot.
This last option works perfectly




Evert
SoldEdge ST
Windows XP Pro