Link a part to one Drafting 1

[aer73]

Hello.
Someone can help me with this?
I have a part with its drafting and that drafting want to link to another part.
How I can do?
Thakns for help me.
Best regards.

 

[ShaggyPE]

With nothing open, go to file>open and select your drawing file (.slddrw) but don't click open yet. In the lower right of that window there is a button called "references". Click that button. Now a window will pop up to change the part file that the drawing is looking at. Browse for the appropriate part file.

-Dustin
Professional Engineer
Pretty good with SolidWorks

 

[evolDiesel]

Couldn't have said it better myself.

Jack Lapham, CSWP
Engr Sys Admin
Dell M6400 Covet (24 Season 8, Ep 22)
Intel Core 2 Duo T9800, 2.93GHz, 1066MHZ 6M L2 Cache
8.0GB, DDR3-1066 SDRAM, 2 DIMM
1Gb nVIDIA Quadro FX 3700M (8.17.12.5896)
W7x64 | sw-01: 55.92
SolidWorks x64sp4 in PDMWx

 

[aer73]

Thanks to all for answer.
It works fine.
Best regards.