Hi all, I have to run a UMAT subroutine in abaqus, unfortunatly, I have some problems in linking abaqus 6.7-1 with the intel visual fortran compiler 9.1. I followed the procedure described on this web page : http://web.mit.edu/solidmech/www/documentation/software.html and I still have some troubleshooting. I have tried the command abaqus info=system and the test for fortran failed as you can see in the attached file. Thanks for help !

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Link abaqus with intel visual fortran

Thread starter Alpha69fr
Start date Nov 12, 2007

Status: Not open for further replies.

Nov 12, 2007

Alpha69fr

Mechanical

Hi all,
I have to run a UMAT subroutine in abaqus, unfortunatly, I have some problems in linking abaqus 6.7-1 with the intel visual fortran compiler 9.1.
I followed the procedure described on this web page :

http://web.mit.edu/solidmech/

http://www/documentation/software.html

and I still have some troubleshooting.
I have tried the command abaqus info=system and the test for fortran failed as you can see in the attached file.
Thanks for help !