I'd like to show a one piece plastic component that has a living hinge. What might be the a good method to construct the CAD model that will allow me to illustrate the part in both the open and closed positions. Need some general hints regarding model construction.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Living Hinge -- Best Practices in Solid Edge
- Thread starter Wicsteve
- Start date
You may only need to change the dimension on the angle of the hinge and take two pictures.
If you want more flexibility Family of parts or an adjustable part will both allow this. There are tutorials for both in the help files. Each have their trade offs depending on your situation.
If you want more flexibility Family of parts or an adjustable part will both allow this. There are tutorials for both in the help files. Each have their trade offs depending on your situation.
- Status
Similar threads
- Locked
- Question