lmv 324 on dual power supply

[macroprocessor]

I am using lmv 324 as a current to voltage converter.But there is a varying dc offset and the output does not go below zero even though i am using +2.5V and -2.5V supplies.please help.

 

[nbucska]

Send specs <nbucska@pcperipherals.com> and perhaps FAX schematics to (303) 439-8651 ATT: Nick

 

[jbartos]

Suggestion: Visit

http://chen2.ethz.ch/ts/work/frames.html

http://www.signalrecovery.com/181detai.htm

http://www3.ncsu.edu/ECE480/480_opam.htm

for more info