Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LNG Properties

Status
Not open for further replies.

stanier

Mechanical
May 20, 2001
2,442
Where can I find the properties of LNG such as viscosity, density and vapour pressure?
 
Replies continue below

Recommended for you

LNG-
Wewll, as you know it's about 90-100% Methane, so it's density is 26.5 LBs/Ft3... and weight about 3.5 lbs/gallon. the Boiling temp is -259F and molecular weight is 16.04 Energy content is about 83,000BTU/gal and LFL=5% and HFL=15%. The Viscosity can vary, but burning(flame) velocity is about .98 ft/sec.

Hope this helps... I imagine there are alot of sites out there you could try SPE (Society of Petroleum Engineers) though.
 
I found that the Chempak database from AFT does the calculation for LNG and 700 other chemicals. It provides fifteen parameters.

Thanks for the responses.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor