Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

LOAD ESTIMATING FOR DISTRIBUTION SYSTEM 1

Status
Not open for further replies.

reza767

Electrical
Feb 21, 2007
2
I WANT TO PLAN A DISTRIBUTION SYSTEM. I NEED SOME TYPICAL DATA SUCH AS VA/m2 FOR DIFFERENT INDUSTRIES AND RESIDENTAL USERS.
 
Replies continue below

Recommended for you

If you are in the USA:

Residential service sizing is well described in NEC. There are guidelines for industrial service sizing too.

You can start with RS Means, Electrical Cost data for a typical industry, but in the end you need firmer data from the industry consultant themselves. (process consultants).

You can also ask repective utility companies serving industrial areas. You will have to find the right person to talk to.


 
Thank you, I find Caps Lock key on my keyboard and turn off it, your link is very usefull.If you have any other refrences please inform me.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor