Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Location of Jockey Pump

Status
Not open for further replies.

DTR

Mechanical
Oct 30, 2002
21
Hi All,

Could someone please advise if it is a code requirement within NFPA 20 for the Jockey Pump and it's Controller to be located in the same room as the Fire Pumps.

As you can probably guess I have space issues!

Cheers

DTR
 
Replies continue below

Recommended for you

does not appear there is a requirement and even appears it has to be minimum five feet from the discharrge side.


BUT, would require the room you stick it in to meet the same building construction requirements as the pump room.
 
I think there is no requirement, but the sensing lines have some requirements, and in some local authorities are strict of the jockey pump suction connection location.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor