Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Long duration shock testing

Status
Not open for further replies.

NickStilwell

Aerospace
Jul 18, 2005
6
GB
Hi, We have a requirement to perform 20g 100ms half-sine shocks on a new product we are developing. The shock requirement comes I believe from a helicopter specification. We have scoured our usual environmental test facilities but the duration is too long for them due to the high displacement required. We have located a facility in Munich but the logistics of performing the test over there is not ideal. Does anyone have any good ideas of a test house in the UK or at least closer off shore that can do this specialised test? The mass of our unit would be circa 10kg.

Hope someone can help
Nick
 
Replies continue below

Recommended for you

Former employer in UK dealt with a test house in Warwick area as I recal, I think Cape engineering. Tried Googling looks like maybe they've been acquired by 'TRaC'
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top