Jan 18, 2009 #2 saberblue Industrial May 1, 2007 157 Check with the SME they have a series of process videos -- I have made extensive use of the metal removal ones but not the forming so I don't know if they have a DOM demonstration but would not be surprised A.R. "Andy" Nelson Engineering Consultant anelson@arnengineering.com Upvote 0 Downvote
Check with the SME they have a series of process videos -- I have made extensive use of the metal removal ones but not the forming so I don't know if they have a DOM demonstration but would not be surprised A.R. "Andy" Nelson Engineering Consultant anelson@arnengineering.com
Jan 19, 2009 #3 EdStainless Materials May 20, 2004 16,083 What part of the process are you interested in showing? After all it looks just like any draw process from the outside. = = = = = = = = = = = = = = = = = = = = Plymouth Tube Upvote 0 Downvote
What part of the process are you interested in showing? After all it looks just like any draw process from the outside. = = = = = = = = = = = = = = = = = = = = Plymouth Tube
Jan 19, 2009 #4 ornerynorsk Industrial Feb 5, 2002 3,198 If you are within a couple hours of a tube mill, set up a plant walk-through. It's a fascinating process and you will learn much more than just the DOM process. Upvote 0 Downvote
If you are within a couple hours of a tube mill, set up a plant walk-through. It's a fascinating process and you will learn much more than just the DOM process.
Jan 19, 2009 #5 unclesyd Materials Aug 21, 2002 9,819 USS did have a video on the DOM process. You might contact them, but hurry they are closing their DOM mills. Upvote 0 Downvote
USS did have a video on the DOM process. You might contact them, but hurry they are closing their DOM mills.
