Looking for a product. Strange surface mount pins.

[PaulDAmour]

Hello,


I'm looking to buy some pins that can be soldered onto PCB boards (non-through hole) and allow the PCB to be inserted into a standard DIP socket. The pins dimensions are such that they fit directly into DIP sockets when soldered into pin-arrays.


I have a picture of exactly what I'm looking for. Please refer to:

http://www.superrobotica.com/Images/S310130big.JPG

The chip in the above picture has 24 of these pins (exactly what I'm looking for) around the perimeter of the chip. Do you offer a part similar to this? Would you be able to supply me a part number or distributor that would be able to fulfill my needs?


Thanks a bunch,
Paul

 

[itsmoked]

Contact mill-max they specialize in all kinds of pins. They "are the pin people".

Keith Cress
Flamin Systems, Inc.-

http://www.flaminsystems.com

 

[IRstuff]

Vector Electronics used to make something like that

TTFN

 

[ScottyUK]

The product in question is known as 'lead frame' or maybe 'leadframe' depending on the manufacturer. When I worked in hybrids we used kilometers of it each week. The manufacturer we dealt with most often was Proner Comatel, now apparently known as

http://www.kontek-comatel.com/

Hope this helps.

----------------------------------

I don't suffer from insanity. I enjoy it...

 

[TurboXS]

http://www.die-tech.org/

look under "Leadframe, Edge Clips, and Connectors"

regards
Peter

 

[TurboXS]

Okay now I've found them but where can I buy them in Australia?