Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for companies that build wind tunnels 1

Status
Not open for further replies.

Felipe Pasquali

Mechanical
May 4, 2017
1
I work in the area of wind turbine blade research. Our research group is in the Western New York area. We are making plans to install a boundary layer wind tunnel. This would be an open loop system with a maximum speed of 25 m/s through a test area around 1 m x 1 m. We are currently putting together a list of the potential vendors that could supply a tunnel. If anyone has any suggestions for wind tunnel manufacturers, I would appreciate it if you could you please let me know.
 
Replies continue below

Recommended for you

AeroLab- Maryland
Engineering Systems International- Maryland
Engineering Laboratory Design- Minnesota

 
I'd suggest asking schools that want to get rid of one. Call SAIT. They have approx. 0.4m x 0.4m that could be picked up on the cheap.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor