Looking for CSI 2120 Users.

[volvibeguy]

Looking for other Analysis / Condition Monitoring / Laser Alignment / On-Site Balancing Technicians to share information with discuss occasional problems,compare notes on common or uncommon practices and applications with,for research and development of techniques and top priority customer care and service response.

 

[dgallagher]

Reliability Magazine message boards are better suited for your PdM focus:

http://209.15.74.79/ubb2000/cgi/Ultimate.cgi?action=intro

Best regards,
Dave G.

http://www.reliabilitydirect.com

 

[micjk]

volvibeguy,
I work for a synthetic fiber manufacturer in South Carolina. We have several pieces of CSI's equipment. I would be glad to trade notes and/or ideas concerning the operation of the equipment, and condition monitoring in general. I can be reached by e-mail or phone from 7:00 am - 3:30 pm (EST) Monday- Friday. If I am not in, leave a message and I will get back to you as soon as possible.
E-mail : roy.gariepy.b@bayer.com
Phone : (843) 820-6232
Regards,
Roy Gariepy
Maintenance and Reliability Technician
Bayer Corp.
Goose Creek, SC