Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Looking for Encoder

Status
Not open for further replies.

Drivesrock

Electrical
May 27, 2005
122
Hi all!

Does anyone recognise this encoder and manufacturer?

AEBRIELTD (or perhaps AEBRIE Ltd??)
model 9DITCW/33/24-P/6 24Vdc Optical

My customer has one that has gone wrong and asked to find a replacement.

The best info would be the number of pulses as 24Vdc encoders are easy to source.

I look forward to any replies and thank you all in advance.



 
Replies continue below

Recommended for you

Usually you can get any encoder with many different
resolution (# of pulses/rev) - so unless the partnumber
includes the resolution info, you can't find it out.

What is the diameter and the required resolution?
If you don't know :

What is it used for? Do you have the data/schematics of the
circuit which uses the output?



Plesae read FAQ240-1032
WEB: <
 
It would be possible to find it out experimentally by

1.) installing a high but arbitrary resolution
encoder
2.) inserting a frequency translator circuit into the
output and set the frequency ratio experimentally


Plesae read FAQ240-1032
WEB: <
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor