Looking for help with an INTERNAL ERROR

[jdsmi]

We are running AutoCad 14 Which is the platform for our Inspection sofware.
Lately we have been getting the following error when trying to open a previously saved .dwg file.

INTERNAL ERROR:!savers.cpp@375:eGeneral Modeling Failure

ACIS error 3300

Does anyone have any idea what this is or where I can go to try and decifer the message?

Thanks

 

[OZZY84]

is it ALL saved drawings or just one in particular?

searched Acad knowledge base and this is what came up.

http://usa.autodesk.com/adsk/servle...p=+PRODC:2475145&qp=+REL:20021&lk=1&st=1&rq=0

hope this helps.

Intel P4 1.7 GHZ
768 RDRAM
Win 2000 Pro
Autocad 14, 2002 with EP 2.3.1

 

[jdsmi]

Not all drawings. The main common factor is the files were originally imported from either Catia or UG, then re-saved as a dwg. I'm not an Autocad expert but I am well aware of the problems in importing data from Catia (especially) & UG into other CAD platforms. I'm not sure if this is the root of the problem in this case though.

I'll read through the link and see what I can find. I did notice R14 is not on the Win2000 list though and that is the OS we are running.

Thanks...