Looking for project data on evaporative cooling and displaced ventilation

[nglty]

Hi folks.

I am trying to obtain actual installed project data from buildings using evaporative cooling in the south-west US (New Mexico; Arizona, and southern CA).
Ideally, I could use data from projects with the following criterias:

1. Ideal Location: Tucson, AZ, or anywhere nearby with a 65F wb temperature design or lower.
2. Evaporative cooling data available, print-out form BAS is ideal.
3. Systems used in industry preferred.
4. System used in buildings with high ceiling with low supply and roof relief with 100% exhaust, such as bus, boat or train maintenance bays.
5. Implemented displaced ventilation.
6. Manufacturer contact names and phone numbers.
7. Operating costs. Maintenance and energy costs if available would be great.
8. If possible, allow for videotaping or picture taking of the system in place.

Anything you can share will help.

Thank you

 

[LittleInch]

This looks like a list to send to a vendor for a pre-qualification or as part of a tender, not a question for engineers I'm afraid.



Remember - More details = better answers
Also: If you get a response it's polite to respond to it.

 

[nglty]

That was my first try LittleInch.
I already contacted a few vendors for project addresses to no avail.
I was hoping mainly for facility managers that may have data to share. You'd be surprised of the number of helpful maintenance folks on this site.
By all means, I am not looking for engineering help. Just empirical data that can either be printed out or that I can collect myself is it is not too much trouble.